Cadex Scanners

How much downtime can you afford?

Battery maintenance is inexpensive to implement and contributes significantly to system reliability and your bottom line.

  • Diminishing batteries are one of the leading causes of portable scanner failure. Countless dollars are lost annually to battery-related costs.
  • To ensure they will last a full shift batteries for portable scanning devices should be replaced when their capacity drops to 60%-70%.
  • An effective battery maintenance program will save you time and money

 

 

Test and Maintenance Programs for Portable Scanner Fleets

Automated programs support all your battery needs and the 18 available service programs are grouped below into Basic, Advanced and Custom.

Basic Programs

  • Auto – Exercises the batteries and applies Recondition if the user-set target capacity cannot be reached
  • Charge – Applies a fast charge only
  • Prime – Prepares batteries for field use by repeated cycling until the maximum capacity is reached
  • QuickSort™ – Sorts lithium-ion packs into Good, Low and Poor in 30 seconds

Advanced Programs

  • Self-Discharge – Determines the rate at which a battery loses charge
  • Life Cycle – Counts number of charge/discharge cycles before the battery capacity drops to selected target level
  • Discharge Only – Discharges battery for storage; tests chargers
  • Extended Prime – Applies a 16-hour trickle charge, followed by Prime. Prepares difficult to charge batteries
  • OhmTest – Measures internal battery resistance in 6 seconds
  • Runtime – Simulates field application with three adjustable load currents and time intervals
  • Boost – Reactivates seemingly dead batteries that have been discharged too low
  • QuickTest™ – Provides battery state-of-health in 3 minutes. Needs specific battery matrix
  • Q-Learn – Provides initial QuickTest™ matrix by scanning a good battery. Service time is 3-5 minutes
  • Learn – Improves QuickTest™ matrix by scanning batteries with different state-of-health status. Service time is 3-8 hours per battery

Custom programs

Four separate Custom programs allow user-defined programs composed of charge, discharge, recondition, wait and repeats. The programs follow a different path if a certain condition occurs.

 


ALL-IN-ONE BUNDLES:

2-BAY

Includes:

  • Cadex C7200 C-Series Battery Analyzer
  • 2 Battery Adapters (any type)
  • Cadex BatteryShop™ 1
  • DYMO 450 Label Printer
  • USB Barcode Reader

4-BAY

Includes:

  • Cadex C7400 C-Series Battery Analyzer
  • 4 Battery Adapters (any type)
  • Cadex BatteryShop™ 1
  • DYMO 450 Label Printer
  • USB Barcode Reader

4-BAY Extended Range

Includes:

  • Cadex C7400ER C-Series Battery Analyzer
  • 4 Battery Adapters (any type)
  • Cadex BatteryShop™ 1
  • DYMO 450 Label Printer
  • USB Barcode Reader

ALL-IN-ONE BUNDLES:

2-BAY
Includes:

  • Cadex C7200 C-Series Battery Analyzer
  • 2 Battery Adapters (any type)
  • Cadex BatteryShop™ 1

 


4-BAY

Includes:

  • Cadex C7400 C-Series Battery Analyzer
  • 4 Battery Adapters (any type)
  • Cadex BatteryShop™ 1

 


4-BAY Extended Range

ncludes:

  • Cadex C7400ER C-Series Battery Analyzer
  • 4 Battery Adapters (any type)
  • Cadex BatteryShop™ 1

 


UNIVERSAL CONDITIONING CHARGERS

The Cadex Universal Conditioning Chargers (UCC) offer refinements usually not found on competitive chargers. The rugged design stands up to the critical demands of industrial users. Intelligent adapters allow simultaneous service of nickel-cadmium, nickel-metal-hydride and lithium-ion batteries on the same platform. A conditioning button conditions and calibrates batteries on demand, and a reverse-pulse charging prolongs battery life.